Bank of America partnered with DOE's Commercial Building Partnerships (CBP) Program to develop and implement solutions to build a new bank branch in Punta Gorda, Florida, with a goal of being at least 50% below ASHRAE Standard 90.1-2004. The branch opened in October 2011 and achieved actual energy savings of 47%.
Advanced SearchYour search resulted in 7 resources
PNC Financial Services partnered with DOE's Commercial Building Partnerships (CBP) Program to develop and implement solutions to retrofit its existing Singer Island, Florida, branch to reduce energy consumption by at least 30% versus ASHRAE Standard 90.1-2004. Construction was completed in January 2012.
Kohl’s partnered with the Department of Energy (DOE) to develop and implement solutions to retrofit existing buildings to reduce annual energy consumption by at least 30% versus requirements set by Energy Standard 90.1-2004 of the American Society of Heating, Refrigerating, and Air-Conditioning Engineers (ASHRAE), the American National Standards Institute (ANSI), and the Illuminating Engineering Society of America (IESNA) as part of DOE’s Commercial Building Partnership (CBP) program. The National Renewable Energy Laboratory (NREL) provided technical expertise in support of this DOE program. Kohl’s retrofitted a 17 year-old, single-story 87,000 sq. ft store in Niles, Ohio. Kohl’s also designated the store as a DOE Better Buildings Challenge showcase store.
One of the nation’s largest schools serving over 60,000 students, the University of Minnesota (U of M) is upgrading the lighting at all 18 parking ramps and garages on its Minneapolis campus. In the Northrop Auditorium Garage, a small 24,000 square foot facility with 75 parking spots, U of M replaced low-wattage high-pressure sodium fixtures with high efficiency, lower- wattage LED fixtures with lighting controls. This Lighting Energy Efficiency in Parking (LEEP) Campaign Award winning project achieved 90% energy savings by upgrading to LEDs with lighting controls.
NorthBay VacaValley Hospital completed lighting retrofits to their 150,000 square foot parking lot and its 225 parking spaces. They did so with help from The California Lighting Technology Center (CLTC) at the University of California, Davis. The project has achieved 65% savings and received a 2014 Lighting Energy Efficiency in Parking (LEEP) Campaign’s award for best use of lighting controls. In addition, the retrofits improved lighting maintenance operations and end-user satisfaction.
The lighting retrofit included replacing roughly 50 induction luminaires with new LED fixtures with embedded lighting controls.
The new LED fixtures were coupled with various kinds of lighting control systems, including a radio frequency (RF) connectivity control system that was installed in dedicated zones with passive- infrared (PIR) and long-range microwave sensors to achieve energy savings. An “ultra-smart” lighting control network was also put in place, giving facility managers the ability to adjust lighting schedules, light levels and time-out settings, monitor the system’s energy use, and receive automated alerts when luminaires require maintenance.
K–12 schools are ideal candidates to lead the market shift from buildings that consume energy to buildings that produce as much renewable energy as they use. There are now resources to guide owners and project teams as they make the shift to these “zero energy” buildings, notably the Advanced Energy Design Guide for K–12 School Buildings: Achieving Zero Energy (K–12 ZE AEDG).
This 10-page paper provides a concise overview of the K–12 ZE AEDG (200 pages), as well as a nice explanation of the energy modeling and analysis methodology used to create the Design Guide.
This guide provides user-friendly guidance for achieving a net zero energy K-12 school building. It includes a set of energy performance targets for all climate zones. Strategies on how to achieve these energy targets are provided throughout the guide and include setting measurable goals, hiring design teams committed to that goal, using energy simulation throughout the design and construction process, and being aware of how process decisions affect energy usage.
The how-to tips address specific project aspects-building and site planning, envelope, daylighting, electric lighting, plug loads, kitchens and food service, water heating, HVAC, and renewable energy generation. Each section contains multiple tips that move the design incrementally toward the zero energy goal. Case studies and technical examples show how the energy goals are achievable at typical construction budgets as well as demonstrate the technologies in real-world applications.
The intended audience of this guide includes educators, school administrators, architects, design engineers, energy modelers, contractors, facility managers, and building operations staff.
The "download" link will take you to the ASHRAE website, where you can download a free PDF of the Design Guide.