The General Service Administration's (GSA) Green Proving Ground (GPG) program worked with a team from the National Renewable Energy Laboratory (NREL) to identify buildings with office setups and equipment distributions typical of the wider GSA building stock. Eight buildings from GSA’s Mid-Atlantic Region, where plug loads average 21%, were selected. In each building, approximately 12 standard power strips with no control capability (the incumbent technology) were replaced with APSs, which monitored and provided power to an array of devices. More than 295 devices were monitored during the study, which consisted of three separate test periods, each four weeks in length. All buildings selected had workstation power management in place.
Advanced SearchYour search resulted in 6 resources
The Advanced Energy Design Guide for Small Hospitals and Healthcare Facilities can help in the design of new healthcare facilities that are 30% more energy efficient than current industry standards using ANSI/ASHRAE/IESNA Standard 90.1-1999 as a benchmark. This saves energy but also supports the other design goals important to healthcare facilities: to improve the patient experience, enhance the healing environment, increase staff retention, lower construction and operating costs, contribute to an environmentally conscious building design, and improve the bottom-line performance of the healthcare facility.
The Advanced Energy Design Guide for Small Office Buildings is intended to provide a simple approach for contractors and designers who create office buildings up to 20,000 ft2. Application of the recommendations in the Guide should result in small office buildings with 30% energy savings when compared to those same office buildings designed to the minimum requirements of ANSI/ASHRAE/IESNA Standard 90.1-1999.
Miscellaneous electrical loads (MELs) are building loads that are not related to general lighting, heating, ventilation, cooling, and water heating, and typically do not provide comfort to the building occupants. MELs in commercial buildings account for almost 5% of U.S. primary energy consumption. On an individual building level, they account for approximately 25% of the total electrical load in a minimally code-compliant commercial building, and can exceed 50% in an ultra-high efficiency building such as the National Renewable Energy Laboratory's (NREL) Research Support Facility (RSF). Minimizing these loads is a primary challenge in the design and operation of an energy-efficient building. A complex array of technologies that measure and manage MELs has emerged in the marketplace. Some fall short of manufacturer performance claims, however. NREL has been actively engaged in developing an evaluation and selection process for MELs control, and is using this process to evaluate a range of technologies for active MELs management that will cap RSF plug loads. Using a control strategy to match plug load use to users' required job functions is a huge untapped potential for energy savings.
The Advanced Energy Design Guide for K-12 School Buildings is the second in a series of Advanced Energy Design Guide (AEDG) publications designed to provide strategies and recommendations for achieving 50% energy savings over the minimum code requirements of ANSI/ASHRAE/IESNA Standard 90.1-2004, Energy Standard for Buildings Except Low-Rise Residential Buildings.
The Advanced Energy Design Guide for Large Hospitals shows that existing reliable technologies and design philosophies can be used to reduce energy use in large hospitals by up to 50% of ANSI/ASHRAE/IESNA Standard 90.1-2004 recommendations.