This presentation discusses the importance of selecting a project delivery method that balances performance, best value, and cost savings.
Advanced SearchYour search resulted in 22 resources
The Research Support Facility complex (RSF, RSF II, parking garage, and associated site lighting) was designed to produce more on-site renewable energy than it uses over the course of a typical weather year, when accounted for at the site. To date, the end use performance monitoring and verification suggests that when the RSF complex is fully built out, we will meet the annual energy use goals. Continued performance monitoring and occupant education are required to ensure annual energy use goals will continue to be met.
A recast of a presentation done for the Fairfax Chapter of Association of Energy Engineers in November of 2013. Presentation focuses on the the Advanced Energy Design Guides published by ASHRAE with association of AIA, USGBC, and IES with funding and technical support from DOE, NREL, and PNNL. In addition, the DOE Advanced Retrofit Guides are also discussed. Both sets of guides are available for download from this resource database.
"Zero Net Energy (ZNE) is the future, and in a growing number of places the present, of building design and energy policy. A growing strategy to get to ZNE is to separate the building’s heating/cooling from the ventilation/dehumidification. Design firms and owners are striving to meet heating, ventilation and air-conditioning (HVAC) loads with optimum comfort and minimal energy. Radiant systems can provide heating and cooling through pipes while ventilation and any humidity control requirements are efficiently met by a Dedicated Outdoor Air System (DOAS). This guide provides an overview of Radiant Heating and Cooling + DOAS systems."
How to determine the amount of continuous insulation required by codes, while still retarding water vapor according to climate zone locations
"While ASHRAE 90.1 has been pushing continuous insulation (CI) for the past decade, the building codes are catching on. And now that the U.S. Department of Energy (DoE) has mandated all states to adopt a commercial building energy code that meets or exceeds ASHRAE Standard 90.1-2010, CI specifications are really being cast into the spotlight."
In the cold climate of the upper Midwest, air-source VRF systems have difficulty meeting heating loads when the outdoor temperatures drop below -5ºF. Because of this difficulty during common cold spells, they are either oversized (adding to system cost) or supplemental heat is added (adding to operating cost). Cold temperatures can also cause frost issues around outdoor units, as well as compressor failure. A VRF system served by a water loop—in place of air—does not have these issues, making the technology more practical and effective in cold climates such as the upper Midwest. A water-source VRF system can be connected to a boiler and cooling tower or, for even higher performance, a ground heat exchanger.
This presentation Session II from the RSF Workshop discusses the performance-based design-build process, which was used to procure and construct the Research Support Facility.
This guide presents a set of 15 best practices for owners, designers, and construction teams to reach high-performance goals and maintain a competitive budget. They are based on the recent experiences of the Research Support Facility owner and design-build team, and show that achieving this outcome requires that all key integrated team members understand their opportunities to control capital costs.
The following guide is intended to provide you with an understanding of the value of submetering on a campus and how to set-up and maintain a submetering program. Case studies from four prominent schools are included to illustrate different solutions for campus submetering. To learn more about reducing energy and water consumption on campuses through benchmarking, upgrades and behavior change, review the companion document "Campus Benchmarking Guide."