This document provides an example request for proposal (RFP) for a Department of Energy (DOE) and National Renewable Energy Laboratory (NREL) Ingress/Egress Project with a Site Entrance Building and Parking Structure. The RFP has been annotated by NREL to demonstrate the project’s steps that follow NREL and DOE’s Energy-Performance-Based Acquisition process.
Advanced SearchYour search resulted in 6 resources
This guide was created to help healthcare facility decision-makers plan, design, and implement energy improvement projects in their facilities. It was designed with energy managers in mind, and presents practical guidance for kick-starting the process and maintaining momentum throughout the project life cycle.
This paper illustrates the challenges of integrating rigorous daylight and electric lighting simulation data with whole-building energy models, and defends the need for such integration in order to achieve aggressive energy savings in building designs. Through a case study example, we examine the ways daylighting – and daylighting simulation – drove the design of a large net-zero energy project.
The California Energy Commission’s Public Interest Energy Research (PIER) program sponsored development of bi-level parking garage luminaires for the University of California, Davis that integrate intelligent controls with bi-level electronic drivers or ballasts to control light output based on garage occupancy. Luminaires operate at a reduced level during vacancy and switch to full light output upon occupancy. Many of the products may be combined with traditional photocontrols to maximize energy savings.
Adaptive exterior lighting is a relatively new concept recognized by the lighting industry and energy regulators as a potential method to increase energy savings in outdoor applications. Many adaptive exterior lighting products are being developed and have been introduced into the marketplace, allowing users to implement dynamic lighting designs that offer 30%–75% energy savings over traditional systems. These savings are achieved by coupling advanced lighting controls with an efficacious, dimmable source.
The California Energy Commission’s Public Interest Energy Research (PIER) Program sponsors the development and demonstration of energy-efficient building technologies. Over the past several years, PIER has developed strategic partnerships with the University of California, California State University, California Community Colleges, and California Department of General Services. These partnerships include a series of demonstration projects coupled with programmatic support to ensure continued deployment of energy-efficient technologies and practices across California. Examples of the latest energy-efficient innovations are described.