Miscellaneous electrical loads (MELs) are building loads that are not related to general lighting, heating, ventilation, cooling, and water heating, and typically do not provide comfort to the building occupants. MELs in commercial buildings account for almost 5% of U.S. primary energy consumption. On an individual building level, they account for approximately 25% of the total electrical load in a minimally code-compliant commercial building, and can exceed 50% in an ultra-high efficiency building such as the National Renewable Energy Laboratory's (NREL) Research Support Facility (RSF). Minimizing these loads is a primary challenge in the design and operation of an energy-efficient building. A complex array of technologies that measure and manage MELs has emerged in the marketplace. Some fall short of manufacturer performance claims, however. NREL has been actively engaged in developing an evaluation and selection process for MELs control, and is using this process to evaluate a range of technologies for active MELs management that will cap RSF plug loads. Using a control strategy to match plug load use to users' required job functions is a huge untapped potential for energy savings.
Advanced SearchYour search resulted in 5 resources
The PIER Demonstration program partnered with the University of California, Davis to demonstrate new construction and retrofit design strategies that provide dual light levels based on occupancy sensing that is appropriate for the interior corridor application. This demonstration project consists of a one-to-one retrofit of existing fluorescent luminaires with either new fixtures or new components for three corridor areas in Bainer Hall. This project is intended to demonstrate the energy savings that can be achieved by using occupancy-based controls for interior corridor applications.
This guide was sponsored by the California Energy Commission and developed by the California Lighting Technology Center at UC Davis. It is intended to be used as a supplement for the 2008 Residential Compliance Manual. It is a resource to help contractors, designers, and builders understand the 2008 Title 24 Building Energy Efficiency Standards and how to integrate these changes into new home plans. This guide consists of two key sections: the Technology Overview and the Lighting Design Guide.
Adaptive exterior lighting is a relatively new concept recognized by the lighting industry and energy regulators as a potential method to increase energy savings in outdoor applications. Many adaptive exterior lighting products are being developed and have been introduced into the marketplace, allowing users to implement dynamic lighting designs that offer 30%–75% energy savings over traditional systems. These savings are achieved by coupling advanced lighting controls with an efficacious, dimmable source.
The California Energy Commission’s Public Interest Energy Research (PIER) Program sponsors the development and demonstration of energy-efficient building technologies. Over the past several years, PIER has developed strategic partnerships with the University of California, California State University, California Community Colleges, and California Department of General Services. These partnerships include a series of demonstration projects coupled with programmatic support to ensure continued deployment of energy-efficient technologies and practices across California. Examples of the latest energy-efficient innovations are described.