This report summarizes an evaluation of LED recessed downlight luminaires in the guest rooms at the Hilton Columbus Downtown hotel in Columbus, OH. The facility opened in October of 2012, and the U.S. Department of Energy (DOE) conducted a post-occupancy assessment of the facility in January–March of 2014. Each of the 484 guest rooms uses seven 15 W LED downlights: four downlights in the entry and bedroom and three downlights in the bathroom. The 48 suites use the seven 15 W LED downlights and additional fixtures depending on the space requirements, so that in total the facility has more than 3,700 LED downlights. The downlights are controlled through wall-mounted switches and dimmers. A ceiling-mounted wireless vacancy sensor ensures that the bathroom luminaires are turned off when the room is not occupied.
Advanced SearchYour search resulted in 13 resources
One of the nation’s largest schools serving over 60,000 students, the University of Minnesota (U of M) is upgrading the lighting at all 18 parking ramps and garages on its Minneapolis campus. In the Northrop Auditorium Garage, a small 24,000 square foot facility with 75 parking spots, U of M replaced low-wattage high-pressure sodium fixtures with high efficiency, lower- wattage LED fixtures with lighting controls. This Lighting Energy Efficiency in Parking (LEEP) Campaign Award winning project achieved 90% energy savings by upgrading to LEDs with lighting controls.
NorthBay VacaValley Hospital completed lighting retrofits to their 150,000 square foot parking lot and its 225 parking spaces. They did so with help from The California Lighting Technology Center (CLTC) at the University of California, Davis. The project has achieved 65% savings and received a 2014 Lighting Energy Efficiency in Parking (LEEP) Campaign’s award for best use of lighting controls. In addition, the retrofits improved lighting maintenance operations and end-user satisfaction.
The lighting retrofit included replacing roughly 50 induction luminaires with new LED fixtures with embedded lighting controls.
The new LED fixtures were coupled with various kinds of lighting control systems, including a radio frequency (RF) connectivity control system that was installed in dedicated zones with passive- infrared (PIR) and long-range microwave sensors to achieve energy savings. An “ultra-smart” lighting control network was also put in place, giving facility managers the ability to adjust lighting schedules, light levels and time-out settings, monitor the system’s energy use, and receive automated alerts when luminaires require maintenance.
Access to foundational energy performance data is key to improving the efficiency of the built environment. However, stakeholders often lack access to what they perceive as credible energy performance data. Therefore, even if a stakeholder determines that a product would increase efficiency, they often have difficulty convincing their management to move forward. Even when credible data do exist, such data are not always sufficient to support detailed energy performance analyses, or the development of robust business cases.
One reason for this is that the data parameters that are provided are generally based on the respective industry norms. Thus, for mature industries with extensive testing standards, the data made available are often quite detailed. But for emerging technologies, or for industries with less well-developed testing standards, available data are generally insufficient to support robust analysis. However, even for mature technologies, there is no guarantee that the data being supplied are the same data needed to accurately evaluate a product’s energy performance.
To address these challenges, the U.S. Department of Energy funded development of a free, publically accessible Web-based portal, the Technology Performance Exchange™, to facilitate the transparent identification, storage, and sharing of foundational energy performance data. The Technology Performance Exchange identifies the intrinsic, technology-specific parameters necessary for a user to perform a credible energy analysis and includes a robust database to store these data. End users can leverage stored data to evaluate the site-specific performance of various technologies, support financial analyses with greater confidence, and make better informed procurement decisions.
This study expands and validates previous research by Heschong Mahone Group that found a statistical correlation between the amount of daylight in elementary school classrooms and student performance. The researchers reanalyzed student performance data from two school districts to answer questions raised by the previous study. The results are consistent with the original findings and affirm that daylight has a positive and highly significant association with improved student performance.
"Energy conservation presents a compelling and rich opportunity for K-12 schools. Historically, energy expenses in schools have been treated as relatively fixed and inevitable, flowing steadily in the background as administrators concentrated on urgent needs and programmatic priorities. There is growing awareness, however, that a focus on energy use in schools yields an array of important rewards in concert with educational excellence and a healthful learning environment. And there is new interest in behavior-based initiatives through which faculty, staff and students can be significant players in changing a school’s energy profile."
A report with case studies on 15 Zero Energy schools in the U.S., prepared to help Baltimore City Schools in its building planning.
A detailed two page case study on the Zero Energy Ready Turkey Foot Middle School.
"Turkey Foot is revolutionizing the way kids learn, all within a new building that uses half the energy of the previous school despite being twice the size. Turkey Foot leveraged the practices and experience on other high performance goals in the District."
Presentation at CxEnergy 2014 conference by Hanson, Inc. the commissioning agent for Sandy Grove Middle School. Sandy Grove, in Lumber Bridge, NC, is the first Zero Energy school built with a public-private partnership in the U.S.. Presentation includes technologies used, benefits of Zero Energy, common issues with the technologies they used, and lessons learned.
7x7x7: Design Energy Water is an innovative program by the Division of the State Architect that encouraged California school districts to develop long-range master plans that reduce energy and water consumption on campuses and improve the quality of educational spaces. The State Architect engages seven architectural firms to develop seven conceptual case studies that reduce school energy and water consumption and result in better learning environments on seven different types of campuses (six K-12 schools and a community college). The seven campuses are representative of typical building types from different eras constructed across California’s varied climate zones. The purpose and primary goal of this program is to enable all existing K-14 facilities to be zero energy by 2030.