One of the nation’s largest schools serving over 60,000 students, the University of Minnesota (U of M) is upgrading the lighting at all 18 parking ramps and garages on its Minneapolis campus. In the Northrop Auditorium Garage, a small 24,000 square foot facility with 75 parking spots, U of M replaced low-wattage high-pressure sodium fixtures with high efficiency, lower- wattage LED fixtures with lighting controls. This Lighting Energy Efficiency in Parking (LEEP) Campaign Award winning project achieved 90% energy savings by upgrading to LEDs with lighting controls.
Advanced SearchYour search resulted in 27 resources
NorthBay VacaValley Hospital completed lighting retrofits to their 150,000 square foot parking lot and its 225 parking spaces. They did so with help from The California Lighting Technology Center (CLTC) at the University of California, Davis. The project has achieved 65% savings and received a 2014 Lighting Energy Efficiency in Parking (LEEP) Campaign’s award for best use of lighting controls. In addition, the retrofits improved lighting maintenance operations and end-user satisfaction.
The lighting retrofit included replacing roughly 50 induction luminaires with new LED fixtures with embedded lighting controls.
The new LED fixtures were coupled with various kinds of lighting control systems, including a radio frequency (RF) connectivity control system that was installed in dedicated zones with passive- infrared (PIR) and long-range microwave sensors to achieve energy savings. An “ultra-smart” lighting control network was also put in place, giving facility managers the ability to adjust lighting schedules, light levels and time-out settings, monitor the system’s energy use, and receive automated alerts when luminaires require maintenance.
Presentation slides from Design Team Commitment: An Architect's Perspective presentation given at the NASA Net-Zero Energy workshop June 5-6, 2012.
A net zero-energy community (ZEC) is one that has greatly reduced energy needs through efficiency gains such that the balance of energy for vehicles, thermal, and electrical energy within the community is met by renewable energy. Past work resulted in a common zero-energy building (ZEB) definition system of “zero energy” and a classification system for ZEBs based on the renewable energy sources used by a building. This paper begins with a focus solely on buildings and expands the concept to define a zero-energy community, applying the ZEB hierarchical renewable classification system to the concept of community. A community that offsets all of its energy use from renewables available within the community’s built environment and unusable brownfield sites is at the top of the ZEC classification system at a ZEC of A. (A brownfield site is where the redevelopment or reuse may be complicated by the presence or potential presence of a hazardous substance, pollutant or contaminant.) A community that achieves a ZEC definition primarily through the purchase of new off-site, Renewable Energy Certificates (RECs) is placed at the lowest end of the ZEC classification but is still considered a good achievement.
"This paper discusses the evidence regarding daylighting and student performance and development, and presents four case studies of schools that have cost effectively implemented daylighting into their buildings."
"Improved lighting efficiency has long been a major strategy to reduce the energy use in buildings. These savings have traditionally come from improved efficiency of lamps and ballasts. Today, deep energy reductions and Zero Net Energy (ZNE) are possible by continually controlling each of these efficient fixtures in response to varying details within the space. This guide provides an overview of luminaire-level lighting control (LLLC). The full LLLC approach provides controllability at each fixture with real-time energy tracking and data collection."
"Zero Net Energy (ZNE) is the future, and in a growing number of places the present, of building design and energy policy. A growing strategy to get to ZNE is to separate the building’s heating/cooling from the ventilation/dehumidification. Design firms and owners are striving to meet heating, ventilation and air-conditioning (HVAC) loads with optimum comfort and minimal energy. Radiant systems can provide heating and cooling through pipes while ventilation and any humidity control requirements are efficiently met by a Dedicated Outdoor Air System (DOAS). This guide provides an overview of Radiant Heating and Cooling + DOAS systems."
"One of the fastest growing trends in school design is Net Zero Energy Schools. There are now [in 2011 when the article was published] at least a dozen or more schools completed or in construction that have achieved, or have committed to, this incredible level of energy efficiency. In this article we’ll examine this trend and take a brief look at some of the exemplary projects that attempt it."
A solar ready building is engineered and designed for solar installation, even if the solar installation does not happen at the time of construction. The solar ready design features, if considered early in the design process, are typically low or no cost. Attention to building orientation, available roof space, roof type, and other features is key to designing solar ready buildings.
This study expands and validates previous research by Heschong Mahone Group that found a statistical correlation between the amount of daylight in elementary school classrooms and student performance. The researchers reanalyzed student performance data from two school districts to answer questions raised by the previous study. The results are consistent with the original findings and affirm that daylight has a positive and highly significant association with improved student performance.