This decision tree provides information on saving money by implementing advanced power strips and provides specific information on cost, features, drawbacks, and what to look for when purchasing an advanced power strip.
Advanced SearchYour search resulted in 8 resources
A recast of a presentation done for the Fairfax Chapter of Association of Energy Engineers in November of 2013. Presentation focuses on the the Advanced Energy Design Guides published by ASHRAE with association of AIA, USGBC, and IES with funding and technical support from DOE, NREL, and PNNL. In addition, the DOE Advanced Retrofit Guides are also discussed. Both sets of guides are available for download from this resource database.
Find the presentation for the June 3, 2015 webinar on the 50% Advanced Energy Design Guide for Grocery Stores below.
The guide shows practical ways for grocery stores to achieve a 50% energy savings over ASHRAE 90.1-2004 and exceeds the requirements of 90.1-2013. Intended for grocery stores owners and designers, the guide includes specialty sections for refrigeration and food service found, not only in grocery stores but in convenience stores and food service establishments as well.
Speakers highlighted the guide, providing practical how-to tips to achieve the 50% savings level. The guide also helps those who build or design retail stores that may include refrigeration.
Below are the speakers from the webinar.
-Michael Lane, Puget Sound Energy
-Merle McBride, Owens Corning
-Caleb Nelson, CTA Group
-Paul Torcellini, National Renewable Energy Laboratory.
"Zero Net Energy (ZNE) is the future, and in a growing number of places the present, of building design and energy policy. A growing strategy to get to ZNE is to separate the building’s heating/cooling from the ventilation/dehumidification. Design firms and owners are striving to meet heating, ventilation and air-conditioning (HVAC) loads with optimum comfort and minimal energy. Radiant systems can provide heating and cooling through pipes while ventilation and any humidity control requirements are efficiently met by a Dedicated Outdoor Air System (DOAS). This guide provides an overview of Radiant Heating and Cooling + DOAS systems."
This flowchart details steps for selecting a control strategy to reduce plug and process loads. It accompanies the report: "Selecting a Control Strategy for Plug and Process Loads" https://buildingdata.energy.gov/cbrd/resource/1078.
Article in the Whole Building Design Guide about the uses and features of metal roofs that meet "cool roof" standards.
The Advanced Energy Design Guide for Small Warehouses and Self-Storage Buildings (AEDG-WHSE; the Guide) is intended to provide a simple approach for contractors and designers who create warehouses. Application of the recommendations in the Guide should result in warehouses with 30% energy savings when compared to those same warehouses designed to the minimum requirements of ANSI/ASHRAE/IESNA Standard 90.1-1999, Energy Standard for Buildings Except Low-Rise Residential Buildings.
Miscellaneous electrical loads (MELs) are building loads that are not related to general lighting, heating, ventilation, cooling, and water heating, and typically do not provide comfort to the building occupants. MELs in commercial buildings account for almost 5% of U.S. primary energy consumption. On an individual building level, they account for approximately 25% of the total electrical load in a minimally code-compliant commercial building, and can exceed 50% in an ultra-high efficiency building such as the National Renewable Energy Laboratory's (NREL) Research Support Facility (RSF). Minimizing these loads is a primary challenge in the design and operation of an energy-efficient building. A complex array of technologies that measure and manage MELs has emerged in the marketplace. Some fall short of manufacturer performance claims, however. NREL has been actively engaged in developing an evaluation and selection process for MELs control, and is using this process to evaluate a range of technologies for active MELs management that will cap RSF plug loads. Using a control strategy to match plug load use to users' required job functions is a huge untapped potential for energy savings.