Plug and process loads (PPLs) in commercial buildings account for almost 5% of U.S. primary energy consumption. Minimizing these loads is a primary challenge in the design and operation of an energy-efficient building. PPLs are not related to general lighting, heating, ventilation, cooling, and water heating, and typically do not provide comfort to the occupants. They use an increasingly large fraction of the building energy use pie because the number and variety of electrical devices have increased along with building system efficiency. Reducing PPLs is difficult because energy efficiency opportunities and the equipment needed to address PPL energy use in retail spaces are poorly understood.
Advanced SearchYour search resulted in 10 resources
Plug and process loads (PPLs) in commercial buildings account for almost 5% of U.S. primary energy consumption. Minimizing these loads is a primary challenge in the design and operation of an energy-efficient building. PPLs are not related to general lighting, heating, ventilation, cooling, and water heating, and typically do not provide comfort to the occupants. They use an increasingly large fraction of the building energy use pie because the number and variety of electrical devices have increased along with building system efficiency. Reducing PPLs is difficult because energy efficiency opportunities and the equipment needed to address PPL energy use in office spaces are poorly understood.
A case study of the overview, process, and results of the re-tuning that was conducted in a building in Arlington, Virginia by Vornado Realty Trust in October 2012. Re-tuning provided the facilities management team with the ability to identify and understand building scheduling opportunities that drove significant, low-cost energy savings. Five measures were conducted, many of which pertained to the HVAC system.
This dynamic document provides background information to any potential audience of building re-tuning training. This document provides background information specifically geared toward small- to medium-sized commercial building operations. It introduces basic building energy terminology associated with building energy use to “prime” targeted participants to get the most out of the building re-tuning training. The intent is for participants who are less familiar with the concepts to review this material before taking the building re-tuning training class.
The primary audience for this instructor manual is the person who will be teaching the re-tuning course. In addition, community college instructors, retro-commissioning training providers and building operator training providers may find value in the material presented in this instructor manual as well. The purpose of this course is to help building operations staff to learn how to operate buildings more efficiently, reduce operating cost and provide energy savings. The knowledge and skills learned through the training will be highly valued by organizations and companies seeking to improve the performance of their buildings. Provides additional information on what to highlight in each of the small building re-tuning slides.
The intent of this user guide is to provide a description of the functionality of the Energy Charting and Metrics plus Building Re-tuning and Measurement and Verification (ECAM+) tool. ECAM+ facilitates the charting and analysis of energy use and point-level data from utility meters, building automation systems (BASs), and data loggers. This document describes the tool’s general functions and features, including installation, use, guidance, and limitations.The Energy Charting and Metrics Tool (ECAM) is an add-on for Microsoft Excel® which was developed to facilitate analysis of data from building (energy and other data). Key features of ECAM+ include the creation of charts to help re-tuning.
As efficiency gains are made in building lighting and HVAC systems, plug loads become a greater percentage of building energy use and must be addressed to meet energy goals. HVAC and lighting systems are targeted because they are typically the highest energy end uses, but plug load reduction and control should be considered as part of a comprehensive approach to energy reduction.
As part of its overall strategy to meet its energy goals, the Naval Facilities Engineering Command (NAVFAC) partnered with the Department of Energy’s National Renewable Energy Laboratory (NREL) to rapidly demonstrate and deploy cost-effective renewable energy and energy efficiency technologies. This project was one of several demonstrations of new or underutilized commercial energy technologies. The common goal was to demonstrate and measure the performance and economic benefit of the system while monitoring any ancillary impacts to related standards of service and operation and maintenance (O&M) practices. In short, demonstrations at naval facilities simultaneously evaluate the benefits and compatibility of the technology with the U.S. Department of Defense (DOD) mission, and with NAVFAC’s design, construction, operations, and maintenance practices, in particular.
This guide was created to help healthcare facility decision-makers plan, design, and implement energy improvement projects in their facilities. It was designed with energy managers in mind, and presents practical guidance for kick-starting the process and maintaining momentum throughout the project life cycle.
The Advanced Energy Retrofit Guide for K-12 Schools is one of five retrofit guides commissioned by the U.S. Department of Energy. By presenting general project planning guidance as well as more detailed descriptions and financial payback metrics for the most important and relevant energy efficiency measures, the guides provide a practical roadmap for effectively planning and implementing performance improvements in existing buildings. The K-12 Schools guide provides convenient and practical guidance for making cost-effective energy efficiency improvements in public, private, and parochial schools.