This report discusses miscellaneous electrical loads, which are building loads that are not related to general lighting, heating, ventilation, cooling, and water heating, and typically do not provide comfort to the occupants. MELs in commercial buildings account for almost 5% of U.S. primary energy consumption.
Advanced SearchYour search resulted in 14 resources
Conventional information technology (IT) equipment and data center spaces can consume more than 100 times the energy of standard office spaces, so the potential for energy savings is huge. You can use this application guide to reduce your equipment energy consumption in any building with a data center, server closets, or other IT equipment (computers, printers, etc.). Some of these strategies are most effective at the beginning of the design process; others can be implemented at any time and be sequenced as part of the normal procurement and replacement schedule.
Plug and process loads in commercial buildings account for 5% of U.S. primary energy consumption. Minimizing these loads is a primary challenge in the design and operation of an energy-efficient building.
This presentation describes how the designers, owners, and occupants can take advantage of opportunities to reduce plug loads in the Research Support Facility.
This presentation discusses the importance of selecting a project delivery method that balances performance, best value, and cost savings.
The Research Support Facility complex (RSF, RSF II, parking garage, and associated site lighting) was designed to produce more on-site renewable energy than it uses over the course of a typical weather year, when accounted for at the site. To date, the end use performance monitoring and verification suggests that when the RSF complex is fully built out, we will meet the annual energy use goals. Continued performance monitoring and occupant education are required to ensure annual energy use goals will continue to be met.
This presentation shows how the Research Support Facility is a showcase for sustainable, high-performance design, how it incorporates the best in energy efficiency, environmental performance, and advanced controls using a “whole building” integrated design process, and serves as a model for cost-competitive, high-performance commercial buildings for the nation’s design construction, operation, and financing communities.
The Research Support Facility is designed to be one of the world's largest net-zero energy buildings. It incorporates new technologies and techniques and draws on centuries-old concepts. Its operable windows allow natural ventilation. It monitors indoor and outdoor temperatures and displays messages on each computer about opening or closing windows.
The U.S. Department of Energy hopes lessons learned from the Research Support Facility will help guide green-construction practices around the world. Outside experts in efficient construction point out that some of the technology used at NREL is best suited for high-sunlight, low-humidity climates such as Colorado and would not work nearly as well elsewhere. The building also demands a lot from its employees, who must adjust to fluctuating temperatures throughout the day and pop up from their desks to open and shut windows; a workforce less dedicated to energy efficiency might rebel.
This article describes many energy efficiency features of the Research Support Facility and the adjustments employees need to make.