This document identifies the important aspects of building design and construction to enable installation of solar photovoltaic and heating systems at some time after the building is constructed. This document addresses photovoltaic (PV), solar hot water (ST), and solar ventilation preheat (SVP) systems.
Advanced SearchYour search resulted in 11 resources
Momentum behind zero energy building design and construction is increasing, presenting a tremendous opportunity for advancing energy performance in the commercial building industry. At the same time, there is a lingering perception that zero energy buildings must be cost prohibitive or limited to showcase projects. Fortunately, an increasing number of projects are demonstrating that high performance can be achieved within typical budgets. This factsheet highlights replicable, recommended strategies for achieving high performance on a budget, based on experiences from past projects.
There is mounting evidence that zero energy can, in many cases, be achieved within typical construction budgets. To ensure that the momentum behind zero energy buildings and other low-energy buildings will continue to grow, this guide assembles recommendations for replicating specific successes of early adopters who have met their energy goals while controlling costs. Contents include: discussion of recommended cost control strategies, which are grouped by project phase (acquisition and delivery, design, and construction) and accompanied by industry examples; recommendations for balancing key decision-making factors; and quick reference tables that can help teams apply strategies to specific projects.
Plug loads are often not considered as part of the energy savings measures in Commercial Buildings; however, they can account for up to 50% of the energy used in the building. These loads are numerous and often scattered throughout a building. Some of these loads are purchased by the owner and some designed into the building or the tenant finishes for a space.
Report on the findings from a field validation study of the LIQUIDARMOR CM Flashing and Sealant technology at the Homeland Security Training Center at the College of DuPage in Glen Ellyn, IL. Blower door test results show the average air leakage rate in the demonstration site to be 0.15 cfm/ft2 at 1.57 psf, or 63 percent lower than the 0.4 cfm at 1.57 psf specified in the 2015 International Energy Conservation Code (IECC). According to the results of the simulation, the Training Center lowered its annual heating and cooling costs by $3,000, or 9 percent, compared to a similar building without an air barrier system.
NREL experienced a significant increase in employees and facilities on our 327-acre main campus in Golden, Colorado over the past five years. To support this growth, researchers developed and demonstrated a new building acquisition method that successfully integrates energy efficiency requirements into the design-build requests for proposals and contracts. We piloted this energy performance based design-build process with our first new construction project in 2008. We have since replicated and evolved the process for large office buildings, a smart grid research laboratory, a supercomputer, a parking structure, and a cafeteria. Each project incorporated aggressive efficiency strategies using contractual energy use requirements in the design-build contracts, all on typical construction budgets. We have found that when energy efficiency is a core project requirement as defined at the beginning of a project, innovative design-build teams can integrate the most cost effective and high performance efficiency strategies on typical construction budgets. When the design-build contract includes measurable energy requirements and is set up to incentivize design-build teams to focus on achieving high performance in actual operations, owners can now expect their facilities to perform. As NREL completed the new construction in 2013, we have documented our best practices in training materials and a how-to guide so that other owners and owner’s representatives can replicate our successes and learn from our experiences in attaining market viable, world-class energy performance in the built environment.
Article in the Whole Building Design Guide about the uses and features of metal roofs that meet "cool roof" standards.
Collection of resources on cool roofs and reducing urban heat island effect. From Berkeley National Laboratory's Heat Island Group.
An economic comparison by Lawrence Berkeley National Laboratory of the lifecycle costs of white, green and black flat roofs.
The Indoor Air Quality Guide: Best Practices for Design, Construction and Commissioning is designed for architects, design engineers, contractors, commissioning agents, and all other professionals concerned with indoor air quality. The detailed guidance provides best practices for all aspects of IAQ building design, commissioning, and construction, including designing for maintainability.
The Guide was developed in cooperation with the American Institute of Architects, The U.S. Green Building Council, the Builders and Owners Management Association International, the Sheet Metal and Air Conditioning Contractors of North America, and the U.S. Environmental Protection Agency.