This report summarizes an evaluation of LED recessed downlight luminaires in the guest rooms at the Hilton Columbus Downtown hotel in Columbus, OH. The facility opened in October of 2012, and the U.S. Department of Energy (DOE) conducted a post-occupancy assessment of the facility in January–March of 2014. Each of the 484 guest rooms uses seven 15 W LED downlights: four downlights in the entry and bedroom and three downlights in the bathroom. The 48 suites use the seven 15 W LED downlights and additional fixtures depending on the space requirements, so that in total the facility has more than 3,700 LED downlights. The downlights are controlled through wall-mounted switches and dimmers. A ceiling-mounted wireless vacancy sensor ensures that the bathroom luminaires are turned off when the room is not occupied.
Advanced SearchYour search resulted in 13 resources
A recast of a presentation done for the Fairfax Chapter of Association of Energy Engineers in November of 2013. Presentation focuses on the the Advanced Energy Design Guides published by ASHRAE with association of AIA, USGBC, and IES with funding and technical support from DOE, NREL, and PNNL. In addition, the DOE Advanced Retrofit Guides are also discussed. Both sets of guides are available for download from this resource database.
This document provides facility managers and building owners with an introduction to measurement and verification (M&V) methods to estimate energy and cost savings of rooftop units replacement or retrofit projects. The M&V methods presented here are helpful in estimating paybacks to justify future projects.
The lack of empirical data on the energy performance of buildings is a key barrier to accelerating the energy efficiency retrofit market. The DOE’s Buildings Performance Database (BPD) helps address this gap by allowing users to perform exploratory analyses on an anonymous dataset of hundreds of thousands of commercial and residential buildings. These analyses enable market actors to assess energy efficiency opportunities, forecast project performance, and quantify performance risk using empirical building data. In this paper, we describe the process of collecting and preparing data for the database, and present a peer-group analysis tool that allows users to analyze building performance for narrowly defined subsets of the database, or peer groups. We use this tool to explore a case study of a multifamily portfolio owner comparing his buildings’ performance to the peer group of multifamily buildings in the local metro area. We also present a performance comparison tool that uses statistical methods to estimate the expected change in energy performance due to changes in building-component technologies. We demonstrate a low-effort retrofit analysis, providing a probabilistic estimate of energy savings for a sample building retrofit. The key advantages of this approach compared to conventional engineering models are that it provides probabilistic risk analysis based on actual
measured data and can significantly reduce transaction costs for predicting savings across a portfolio.
The BEDES Strategic Working Group Recommendations document is a guide to how the BEDES Dictionary can be brought to market and provide the services for which it was designed.
The U.S. Department of Energy created the Building Energy Data Exchange Specification (BEDES) to facilitate the exchange of information on building characteristics and energy use in an inexpensive and unambiguous manner.
The BEDES Dictionary 1.0 was developed by DOE to support the analysis of the performance of buildings by providing a common set of terms and definitions for building
characteristics, efficiency measures, and energy use.
While the availability of “big data” about building energy performance is increasing in response to market demands and public policies, the lack of standard data formats is a significant ongoing barrier to its full utilization. To overcome this barrier, the U.S. Department of Energy (DOE) and Lawrence Berkeley National Laboratory (LBNL) developed the Building Energy Data Exchange Specification (BEDES).
BEDES is designed to enable the exchange, comparison, and combination of empirical information by providing common terms and definitions for data about commercial and residential building’s physical and operational characteristics, energy use, and efficiency measures.
This paper describes the BEDES development process, scope, structure, and plans for implementation and ongoing updates.
Momentum behind zero energy building design and construction is increasing, presenting a tremendous opportunity for advancing energy performance in the commercial building industry. At the same time, there is a lingering perception that zero energy buildings must be cost prohibitive or limited to showcase projects. Fortunately, an increasing number of projects are demonstrating that high performance can be achieved within typical budgets. This factsheet highlights replicable, recommended strategies for achieving high performance on a budget, based on experiences from past projects.
There is mounting evidence that zero energy can, in many cases, be achieved within typical construction budgets. To ensure that the momentum behind zero energy buildings and other low-energy buildings will continue to grow, this guide assembles recommendations for replicating specific successes of early adopters who have met their energy goals while controlling costs. Contents include: discussion of recommended cost control strategies, which are grouped by project phase (acquisition and delivery, design, and construction) and accompanied by industry examples; recommendations for balancing key decision-making factors; and quick reference tables that can help teams apply strategies to specific projects.
"Improved lighting efficiency has long been a major strategy to reduce the energy use in buildings. These savings have traditionally come from improved efficiency of lamps and ballasts. Today, deep energy reductions and Zero Net Energy (ZNE) are possible by continually controlling each of these efficient fixtures in response to varying details within the space. This guide provides an overview of luminaire-level lighting control (LLLC). The full LLLC approach provides controllability at each fixture with real-time energy tracking and data collection."
"Zero Net Energy (ZNE) is the future, and in a growing number of places the present, of building design and energy policy. A growing strategy to get to ZNE is to separate the building’s heating/cooling from the ventilation/dehumidification. Design firms and owners are striving to meet heating, ventilation and air-conditioning (HVAC) loads with optimum comfort and minimal energy. Radiant systems can provide heating and cooling through pipes while ventilation and any humidity control requirements are efficiently met by a Dedicated Outdoor Air System (DOAS). This guide provides an overview of Radiant Heating and Cooling + DOAS systems."