This Fact Sheet provides an overview of the Better Buildings Workforce Guidelines project. The Department of Energy (DOE) and the National Institute of Building Sciences (NIBS) are working with industry stakeholders to develop voluntary national guidelines that will improve the quality and consistency of commercial building workforce training and certification programs for five key energy-related jobs.
Advanced SearchYour search resulted in 26 resources
A case study of the overview, process, and results of the re-tuning that was conducted in a building in Arlington, Virginia by Vornado Realty Trust in October 2012. Re-tuning provided the facilities management team with the ability to identify and understand building scheduling opportunities that drove significant, low-cost energy savings. Five measures were conducted, many of which pertained to the HVAC system.
The lack of empirical data on the energy performance of buildings is a key barrier to accelerating the energy efficiency retrofit market. The DOE’s Buildings Performance Database (BPD) helps address this gap by allowing users to perform exploratory analyses on an anonymous dataset of hundreds of thousands of commercial and residential buildings. These analyses enable market actors to assess energy efficiency opportunities, forecast project performance, and quantify performance risk using empirical building data. In this paper, we describe the process of collecting and preparing data for the database, and present a peer-group analysis tool that allows users to analyze building performance for narrowly defined subsets of the database, or peer groups. We use this tool to explore a case study of a multifamily portfolio owner comparing his buildings’ performance to the peer group of multifamily buildings in the local metro area. We also present a performance comparison tool that uses statistical methods to estimate the expected change in energy performance due to changes in building-component technologies. We demonstrate a low-effort retrofit analysis, providing a probabilistic estimate of energy savings for a sample building retrofit. The key advantages of this approach compared to conventional engineering models are that it provides probabilistic risk analysis based on actual
measured data and can significantly reduce transaction costs for predicting savings across a portfolio.
The Smart Monitoring and Diagnostic System (SMDS) is a low-cost technology that helps building owners and managers keep rooftop air conditioner and heat pump units (RTUs) operating properly at peak efficiency. The SMDS technology has the potential to significantly benefit small commercial buildings, which predominately use RTUs for space conditioning. Through the Better Buildings Alliance, a field demonstration was conducted at four sites using two SMDS prototypes. This case study provides a summary of the field demonstration results.
The full report is available at: https://buildingdata.energy.gov/cbrd/resource/1927
7x7x7: Design Energy Water is an innovative program by the Division of the State Architect that encouraged California school districts to develop long-range master plans that reduce energy and water consumption on campuses and improve the quality of educational spaces. The State Architect engages seven architectural firms to develop seven conceptual case studies that reduce school energy and water consumption and result in better learning environments on seven different types of campuses (six K-12 schools and a community college). The seven campuses are representative of typical building types from different eras constructed across California’s varied climate zones. The purpose and primary goal of this program is to enable all existing K-14 facilities to be zero energy by 2030.
UC Davis established the Smart Lighting Initiative (SLI), an effort to reduce campus-wide lighting electricity consumption at least 60% below 2007 levels. The first phase of this program included a large-scale deployment of over 1,500 network-controlled LED streetlights, area lights, post-tops, and wall packs. The “ultra-smart” lighting installation has reduced annual energy use by an estimated 1,231,758 kWh, saving $120,909 annually in energy and maintenance costs.
The Building Controls Virtual Test Bed (BCVTB) is a software environment that allows expert users to couple different simulation programs for co-simulation, and to couple simulation programs with actual hardware. For example, the BCVTB allows to simulate a building in EnergyPlus and the HVAC and control system in Modelica, while exchanging data between the software as they simulate. The BCVTB allows expert users of simulation to expand the capabilities of individual programs by linking them to other programs. Due to the different programs that may be involved in distributed simulation, familiarity with configuring programs is essential.
Develop a simple document and Web-based information guidebook to help commercial building software developers, energy managers, and control companies implement strategies for commercial building energy analysis and performance monitoring. This project will use the following book as a model for the design of the handbook: Builder's Guide to Mixed Climates: Details for Design and Construction by Joseph W. Lstiburek. February 2001. Taunton Press. ISBN 156158388X.
A set of specifications for continuous performance monitoring systems that can be easily adapted and routinely used by a variety of organizations for both new construction and control system retrofits
Internal DOE Report