This Fact Sheet provides an overview of the Better Buildings Workforce Guidelines project. The Department of Energy (DOE) and the National Institute of Building Sciences (NIBS) are working with industry stakeholders to develop voluntary national guidelines that will improve the quality and consistency of commercial building workforce training and certification programs for five key energy-related jobs.
Advanced SearchYour search resulted in 7 resources
The Energy Department worked with members of its Better Buildings Alliance and Federal agencies to develop this performance-based manufacturing specification. The specification recommends minimum performance requirements for one or more multiple wireless measurement devices, or sub-meters. The metering system addresses energy consumption; measuring and monitoring granular electric energy consumption data at the panel-level to support the implementation of energy efficiency improvements.
The Smart Monitoring and Diagnostic System (SMDS) is a low-cost technology that helps building owners and managers keep rooftop air conditioner and heat pump units (RTUs) operating properly at peak efficiency. The SMDS technology has the potential to significantly benefit small commercial buildings, which predominately use RTUs for space conditioning. Through the Better Buildings Alliance, a field demonstration was conducted at four sites using two SMDS prototypes. This case study provides a summary of the field demonstration results.
The full report is available at: https://buildingdata.energy.gov/cbrd/resource/1927
Develop a simple document and Web-based information guidebook to help commercial building software developers, energy managers, and control companies implement strategies for commercial building energy analysis and performance monitoring. This project will use the following book as a model for the design of the handbook: Builder's Guide to Mixed Climates: Details for Design and Construction by Joseph W. Lstiburek. February 2001. Taunton Press. ISBN 156158388X.
This guide provides an overview of the different energy audit options available and information on how to select an energy auditor.
Miscellaneous electrical loads (MELs) are building loads that are not related to general lighting, heating, ventilation, cooling, and water heating, and typically do not provide comfort to the building occupants. MELs in commercial buildings account for almost 5% of U.S. primary energy consumption. On an individual building level, they account for approximately 25% of the total electrical load in a minimally code-compliant commercial building, and can exceed 50% in an ultra-high efficiency building such as the National Renewable Energy Laboratory's (NREL) Research Support Facility (RSF). Minimizing these loads is a primary challenge in the design and operation of an energy-efficient building. A complex array of technologies that measure and manage MELs has emerged in the marketplace. Some fall short of manufacturer performance claims, however. NREL has been actively engaged in developing an evaluation and selection process for MELs control, and is using this process to evaluate a range of technologies for active MELs management that will cap RSF plug loads. Using a control strategy to match plug load use to users' required job functions is a huge untapped potential for energy savings.
This series of fact sheets was developed by the U.S. Department of Energy’s Hospital Energy Alliance. These fact sheets help hospital and healthcare institution owners and operators use effective, energy-efficient technologies and practices to decrease energy consumption and its related costs and to address energy-related environmental issues. Each fact sheet covers a particular area of potential savings in healthcare facilities and includes one or more hospital case studies: Building Envelope Fact Sheet, Boilers Fact Sheet, Chillers Fact Sheet, CHP Fact Sheet, Existing Building Commissioning Fact Sheet, Energy Management Program Fact Sheet, Fast Paybacks Fact Sheet, Ground Source Heat Pumps Fact Sheet, HVAC Fact Sheet, Integrated Building Design Fact Sheet, Lighting Fact Sheet, Plug Loads Fact Sheet, Water Efficiency Fact Sheet.