Plug and process loads in commercial buildings account for 5% of U.S. primary energy consumption. Minimizing these loads is a primary challenge in the design and operation of an energy-efficient building.
Advanced SearchYour search resulted in 36 resources
Plug and process loads (PPLs) in commercial buildings account for almost 5% of U.S. primary energy consumption. Minimizing these loads is a primary challenge in the design and operation of an energy-efficient building. PPLs are not related to general lighting, heating, ventilation, cooling, and water heating, and typically do not provide comfort to the occupants. They use an increasingly large fraction of the building energy use pie because the number and variety of electrical devices have increased along with building system efficiency. Reducing PPLs is difficult because energy efficiency opportunities and the equipment needed to address PPL energy use in office spaces are poorly understood.
This presentation decribes how building an energy-efficient data center can improve a business's bottom line.
This case study describes the National Renewable Energy Laboratory's (NREL) data center as a showcase of energy efficiency. Most of what NREL has done can be replicated by clients; however, two design approaches are climate-dependent: near-full reliance on outside air for cooling, and photovoltaic arrays for power.
Presentation slides from Data Centers: Key Considerations presentation given at the NASA Net-Zero Energy workshop June 5-6, 2012.
This document highlights the key accomplishments in Green IT of the 17 DOE labs.
Acquisition Process for the Design-Build of the Research Support Facility presentation given at the NASA Net-Zero Energy workshop June 5-6, 2012
Presentation slides from Acquisition Process for the Design-Build of the Research Support Facility presentation given at the NASA Net-Zero Energy workshop June 5-6, 2012.
Low energy or high-performance buildings form a vital component in the sustainable future of building design and construction. Rigorous integrated daylighting design and simulation will be critical to their success as energy efficiency becomes a requirement, because electric lighting usually represents a large fraction of the energy consumed. We present the process and tools used to design the lighting systems in the newest building at the National Renewable Energy Laboratory (NREL), the Research Support Facility (RSF). Daylighting had to be integrated with the electric lighting, as low energy use (50% below ASHRAE 90.1-2004) and the LEED daylight credit were contractually required, with a reach goal of being a net-zero energy building (NZEB). The oft-ignored disconnect between lighting simulation and whole-building energy use simulation had to be addressed, as ultimately all simulation efforts had to translate to energy use intensity predictions, design responses, and preconstruction substantiation of the design. We present preliminary data from the postoccupancy monitoring efforts with an eye toward the current efficacy of energy and lighting simulation methodologies.
This document created by Gensler for the University of California San Francisco (UCSF) provides an example request for proposal (RFP) for an academic office building. The RFP has been annotated by the National Renewable Energy Lab (NREL) to demonstrate the project’s steps that follow NREL and DOE’s Energy-Performance-Based Acquisition process.