Energy savings can be achieved in corridors and other secondary spaces with an occupancy-based adaptive lighting system. Such a system is generally composed of occupancy sensors, dimmable ballasts and a communication platform. The system automatically lowers light levels to the minimum footcandles required by safety codes during vacancy and raises light output to the recommended level for occupant comfort during occupied periods. The adaptive lighting system installed at the Latham Square office building is based on Lutron’s Energi TriPak solution, a stand-alone platform for adaptive lighting that employs cost-effective wireless control devices and programmable dimming ballasts.
Advanced SearchYour search resulted in 13 resources
The Research Support Facility is designed to be one of the world's largest net-zero energy buildings. It incorporates new technologies and techniques and draws on centuries-old concepts. Its operable windows allow natural ventilation. It monitors indoor and outdoor temperatures and displays messages on each computer about opening or closing windows.
The U.S. Department of Energy’s Research Support Facility at the National Renewable Energy Laboratory is a new 222,000 square foot office building. It achieves the U.S. Green Building Council’s Leadership in Energy and Environmental Design New Construction Platinum certification, and is expected to become the largest net-zero energy office building in the nation.
Low energy or high-performance buildings form a vital component in the sustainable future of building design and construction. Rigorous integrated daylighting design and simulation will be critical to their success as energy efficiency becomes a requirement, because electric lighting usually represents a large fraction of the energy consumed. We present the process and tools used to design the lighting systems in the newest building at the National Renewable Energy Laboratory (NREL), the Research Support Facility (RSF). Daylighting had to be integrated with the electric lighting, as low energy use (50% below ASHRAE 90.1-2004) and the LEED daylight credit were contractually required, with a reach goal of being a net-zero energy building (NZEB). The oft-ignored disconnect between lighting simulation and whole-building energy use simulation had to be addressed, as ultimately all simulation efforts had to translate to energy use intensity predictions, design responses, and preconstruction substantiation of the design. We present preliminary data from the postoccupancy monitoring efforts with an eye toward the current efficacy of energy and lighting simulation methodologies.
At the time this Wall Street Journal article was published, the National Renewable Energy Laboratory was midway through construction of a $64 million project to be the greenest office building in the nation. This article explores efforts by architects and engineers who spent hundreds of hours calculating the energy use of every aspect of the building, from the elevator to the exit signs.
The California Lighting Technology Center partnered with Finelite, Inc. and Adura Technologies to develop and demonstrate a unique, wireless task/ambient office lighting solution ideally suited for the retrofit market. The system consists of two key elements: a task/ambient lighting system and advanced, wireless lighting controls. The combination substantially reduce energy use and improves lighting quality, and provides personal lighting control for individual work spaces, and does not require additional wiring or rewiring of existing luminaries or lighting circuits. The system has three specific components: adaptive ambient lighting, light-emitting diode task lighting, and wireless controls.
The Research Support Facility complex (RSF, RSF II, parking garage, and associated site lighting) was designed to produce more on-site renewable energy than it uses over the course of a typical weather year, when accounted for at the site. To date, the end use performance monitoring and verification suggests that when the RSF complex is fully built out, we will meet the annual energy use goals. Continued performance monitoring and occupant education are required to ensure annual energy use goals will continue to be met.
The U.S. Department of Energy hopes lessons learned from the Research Support Facility will help guide green-construction practices around the world. Outside experts in efficient construction point out that some of the technology used at NREL is best suited for high-sunlight, low-humidity climates such as Colorado and would not work nearly as well elsewhere. The building also demands a lot from its employees, who must adjust to fluctuating temperatures throughout the day and pop up from their desks to open and shut windows; a workforce less dedicated to energy efficiency might rebel.
This fact sheet published by the National Renewable Energy Laboratory discusses the lab's newest building, the Research Support Facility (RSF). The RSF is a showcase for ultra-efficient workplaces. Various renewable energy and energy efficiency features have been employed so that the building achieves a Leadership in Energy and Environmental Design Platinum rating from the U.S. Green Building Council.
This article describes many energy efficiency features of the Research Support Facility and the adjustments employees need to make.