The Advanced Energy Design Guide for K-12 School Buildings is the second in a series of Advanced Energy Design Guide (AEDG) publications designed to provide strategies and recommendations for achieving 50% energy savings over the minimum code requirements of ANSI/ASHRAE/IESNA Standard 90.1-2004, Energy Standard for Buildings Except Low-Rise Residential Buildings.
Advanced SearchYour search resulted in 26 resources
Plug and process loads in commercial buildings account for 5% of U.S. primary energy consumption. Minimizing these loads is a primary challenge in the design and operation of an energy-efficient building.
Plug and process loads (PPLs) in commercial buildings account for almost 5% of U.S. primary energy consumption. Minimizing these loads is a primary challenge in the design and operation of an energy-efficient building. PPLs are not related to general lighting, heating, ventilation, cooling, and water heating, and typically do not provide comfort to the occupants. They use an increasingly large fraction of the building energy use pie because the number and variety of electrical devices have increased along with building system efficiency. Reducing PPLs is difficult because energy efficiency opportunities and the equipment needed to address PPL energy use in office spaces are poorly understood.
The National Institute of Building Sciences (NIBS)–under contract from the Army Corps of Engineers, the Naval Facilities Engineering Command, the US Air Force, the General Services Administration, the Department of Energy, and the Federal Emergency Management Agency—has developed this comprehensive federal guide for exterior envelope design and construction for institutional/office buildings.
This case study details the successful achievement of zero energy and Living Building Challenge certification.
This case study details the successful achievement of Passive House performance and zero energy at the Friends School of Portland.
This case study describes a successful zero energy school project in Utah.
How to determine the amount of continuous insulation required by codes, while still retarding water vapor according to climate zone locations
This guide presents a set of 15 best practices for owners, designers, and construction teams to reach high-performance goals and maintain a competitive budget. They are based on the recent experiences of the Research Support Facility owner and design-build team, and show that achieving this outcome requires that all key integrated team members understand their opportunities to control capital costs.
This presentation discusses the importance of selecting a project delivery method that balances performance, best value, and cost savings.