Plug and process loads (PPLs) in commercial buildings account for almost 5% of U.S. primary energy consumption. Minimizing these loads is a primary challenge in the design and operation of an energy-efficient building. PPLs are not related to general lighting, heating, ventilation, cooling, and water heating, and typically do not provide comfort to the occupants. They use an increasingly large fraction of the building energy use pie because the number and variety of electrical devices have increased along with building system efficiency. Reducing PPLs is difficult because energy efficiency opportunities and the equipment needed to address PPL energy use in office spaces are poorly understood.
Advanced SearchYour search resulted in 18 resources
This case study presents the lessons learned from incorporating energy efficiency in the rebuilding and renovating of New Orleans K-12 schools after Hurricanes Katrina and Rita. The experiences of four new schools—Langston Hughes Elementary School, Andrew H. Wilson Elementary School (which was 50% new construction and 50% major renovation), L.B. Landry High School, and Lake Area High School—and one major renovation, Joseph A. Craig Elementary School—are described to help other school districts and design teams with their in-progress and future school building projects in hot-humid climates.
This case study details the successful achievement of zero energy and Living Building Challenge certification.
This case study details the successful achievement of Passive House performance and zero energy at the Friends School of Portland.
The Energy Lab at Hawai’i Preparatory Academy is the third building worldwide and the first K–12 school facility to achieve “Living” certification through the Living Building Challenge (LBC). This case study details how the project succeeded in these goals.
This case study describes a successful zero energy school project in Utah.
This case study describes the National Renewable Energy Laboratory's (NREL) data center as a showcase of energy efficiency. Most of what NREL has done can be replicated by clients; however, two design approaches are climate-dependent: near-full reliance on outside air for cooling, and photovoltaic arrays for power.
This document highlights the key accomplishments in Green IT of the 17 DOE labs.
This brochure describes the USD 422 K-12 School in Greensburg, Kansas.
In typical computer centers you can feel the energy consumption from racks of servers radiating heat, while icy air blows through the room to cool them. NREL’s fully contained hot and cold aisle data center configuration minimizes this problem. The configuration includes effective air-side economizer cooling with an evaporative boost when needed.